Servo Voltage Stabilizer

Air Cooled Three Phase Stabilizer

We are engaged in offering a superior quality Air Cooled Three Phase that protects domestic and commercial electrical & electronic system from power fluctuation, this stabilizer is designed by utilizing the supreme class material in compliance with set industry standards. Moreover, we assure our customers that offered stabilizer is examined on several quality parameters.

Features:

  • Easy to operate
  • Rigid design
  • Long functional life

Specification :
StandardConfirming to latest IS:9815 and ISO 9001-2008 Standard
Ratingsingle phase 01 KVA -300 KVA
three phase 03 KVA -3000 KVA
Input VoltageSingle phase (90 v-270 v , 140 v-280 v , 160 v-260 v )
Three phase (150 v-460 v , 250 v-460 v , 270 v-460 v )
Output VoltageSingle phase (220 v/230 v/240 v +/- 1% )
Three phase ( 380 v/400 v/415 v +/- 2% )
Wave Form DistortionNill
Response Time10 m. Sec
Correction MethodStepless correction using variac
Control CircuitFully automatic ic based solid state, glass epoxy control card for easy on line serviceability
Input Frequency45-55 Hz
CoolingNatural air /oil
EfficiencyBetter than 98%
Duty Cycle100. 00%
OperationAuto / Manual
No Load LossLess than 1%
SuitabilitySuitable for 3 phase unbalanced/balanced supply,unbalanced/balanced loads
Operating Temperature-15 °c to 50 °c
Additional FacilityStep down/isolations
Compatibility toSpecially designed control card for faithful
DG SetOperation on mains as well as dg set
Control PanelPower on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/ output voltage with in 5 % of the set output voltage, volt meter to indicator output/input voltage.
Transformers & VariacWound with electrolyte grade copper of 99. 9% purity. Low loss CRGO lamination is used to increased over all efficiency. This reduces energy losses and hences saves electricity
EarthingProvided through two bolts 7 nuts
High VoltageWith stands 2.5 kv for power transformer
InsulatorBetter than 5 m ohms because of wound
ResistanceComponents being baked in the oven at 110 °c after vacuum impregnation

Oil Cooled Stabilizers

In order to meet diverse requirements of our clients, we are engaged in offering Oil Cooled Stabilizers. The offered stabilizer is given in numerous specifications as per the need of patrons. This stabilizer increases the life of appliances and machine. Customers can avail this stabilizer from us at reasonable price.


Features:

 

  • Protect from power fluctuations
  • Reliable functioning
  • High performance


Specification :

StandardConfirming to latest IS:9815 and ISO 9001-2008 Standard
Rating01 KVA-300 KVA single phase
03 KVA -3000 KVA three phase
Input VoltageSingle phase (90 v-270 v, 140 v-280 v, 160 v-260 v )
Three phase (150 v-460 v, 250 v-460 v, 270 v-460 v )
Output VoltageSingle phase (220 v/230 v/240 v +/- 1% )
Three phase ( 380 v/400 v/415 v +/- 2% )
Wave Form DistortionNill
Response Time10 m. Sec
Correction MethodStepless correction using variac
Control CircuitFully automatic ic based solid state, glass epoxy control card for easy on line serviceability
Input Frequency45-55 Hz
CoolingNatural air / oil
EfficiencyBetter than 98 %
Duty Cycle100. 00 %
OperationAuto / Manual
No Load LossLess than 1 %
SuitabilitySuitable for 3 phase unbalanced/balanced supply, unbalanced/balanced loads
Operating Temperature-15 °c to 50 °c
Additional FacilityStep down/isolations
Compatibility toSpecially designed control card for faithful
DG SetOperation on mains as well as DG set
Control PanelPower on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/output voltage with in 5 % of the set output voltage, volt meter to indicator output/input voltage.
Transformers & VariacWound with electrolyte grade copper of 99.9% purity. Low loss CRGO lamination is used to increased over all efficiency. This reduces energy losses and hences saves electricity
Earthingprovided through two bolts 7 nuts
High VoltageWith stands 2. 5 kv for power transformer
Insulatorbetter than 5 m ohms because of wound
ResistanceComponents being baked in the oven at 110 °c after vacuum impregnation

Oil Cooled Servo Voltage Stabilizer

Product Details:
  • Input Voltage: Single phase (90 v-270 v , 140 v-280 v , 160 v-260 v ), Three phase (150 v-460 v , 250 v-460 v , 270
  • Output Voltage: Single phase (220v/230v/240v +/- 1% ). Three phase ( 380v/400v/415v +/- 2% )
  • Phase: Single Phase

With our immense industrial experience, we are affianced in offering a wide range of Single Phase Oil Cooled. Use in domestic applications & offices for precise control of output voltage, our offered single phase stabilizer is designed with utmost precision using the best quality material and advanced technology. The offered single phase stabilizer is widely demanded in the industry for its performance.

Features:

  • Easy to maintain
  • High functionality
  • Reduces breakdown

specification :
StandardConfirming to latest IS:9815 and ISO 9001-2008 Standard
Rating01 kva -300 kva single phase. 03 kva -3000 kva three phase
Input VoltageSingle phase (90 v-270 v , 140 v-280 v , 160 v-260 v ), Three phase (150 v-460 v , 250 v-460 v , 270 v-460 v )
Output VoltageSingle phase (220v/230v/240v +/- 1% ). Three phase ( 380v/400v/415v +/- 2% )
Wave Form DistortionNill
Response Time10 m. Sec
Correction MethodStepless correction using variac
Control CircuitFully automatic ic based solid state, glass epoxy control card for easy on line serviceability
Input Frequency45-55 hz
CoolingNatural air /oil
EfficiencyBetter than 98%
Duty cycle100%
OperationAuto / Manual
No Load LossLess than 1%
SuitabilitySuitable for 3 phase unbalanced/balanced supply, unbalanced/balanced loads
Operating Temperature-15 °c to 50 °c
Additional FacilityStep down/isolations
Compatibility toSpecially designed control card for faithful
DG SetOperation on mains as well as dg set
Control PanelPower on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/ output voltage with in 5% of the set output voltage,volt meter to indicator output/ input voltage
Transformers & VariacWound with electrolyte grade copper of 99. 9% purity . Low loss crgo lamination is used to increased over all efficiency. This reduces energy losses and hences saves electricity
EarthingProvided through two bolts 7 nuts
High VoltageWith stands 2.5 kv for power transformer
InsulatorBetter than 5 m ohms because of wound
ResistanceComponents being baked in the oven at 110 °C after vacuum impregnation

Three Phase Servo Voltage Stabilizer

Specifications:

  • Standard: Confirming ot latest IS:9815 and ISO 9001-2008 stabdard
  • Rating: 01 KVA-300 KVA Single phase, 03 KVA-3000 KVA Three phase
  • Input Voltage: Single phase (90-270V, 140V-280V,160-260V), Three phase (150-460V, 250V-460V, 270V-460V)
  • Output Voltage: Single phase (220V/230V/240V +/-1%), Three phase (380V/400V/415V +/-2%)
  • Wave form distortion: Nill
  • Response Time: 10 m, Sec
  • Correction Method: Stepless correction using variable transfer
  • Control ciruit: Fully automatic IC based solid state
  • Input frequency: 45-55 Hz
  • Cooling: Natural Air/Oil
  • Efficiency: Better Than 98 %
  • Duty Cycle: Continous
  • Operation: Auto/Manual
  • No load loss: Less than 1 %
  • Suitability: Suitable for 3 Phase/unbalanced/balanced supply, unbalanced/Balanced Loads
  • Operating Temperature: 15 C to 50 C
  • Additional Facility: Step down/ Isolation
  • Compatibility to: Specially designed control card for faithful
  • DG Set: Operation on mains as well as DG set
  • Control Pannel: Power on indicator, low/High input indicator Audio/Manual selector switch, Puch switches to adjust output voltage in manual mode, selector switch to monitor input/ output voltage within 5 % the set output voltage, volt meter to indicator/input voltage
  • Transformers & variac: Are wound with conductive grade copper of 99.9 % purity, low loss CRGO lamination is used to increased
  • Earthing: Over all efficiecy
  • This reduces energy losses and hences saves electriciy
  • High Voltage: with stands 2.5 KV for powe transformer
  • Insulator: Better than 6m ohms because of wound
  • Resistance: Componets being baked in the oven at 110 c after vacuum impegnation

Air Cool Servo Voltage Stabilizer

Our organization is delicately engaged in offering an excellent quality of Air Cooled Single Phase that electronic system from power fluctuation, the offered single phase stabilizer is designed with advanced technology. Our single phase stabilizer is stringently checked in compliance with set industry norms. We offer this single phase stabilizer in different specifications in order to fulfill the needs of customers.


Features:

 

  • Require less maintenance
  • Easy to operate
  • High efficiency

 


Specifications:
StandardConfirming to latest IS:9815 and ISO 9001-2008 Standard
Rating01 KVA -300 KVA Single phase
03 KVA -3000 Kva Three Phase
Input VoltageSingle phase (90 V-270 V , 140 V-280 V , 160 V-260 V ) Three phase (150 V-460 V , 250 V-460 V , 270 V-460 V )
Output VoltageSingle phase (220 V/230 V/240 V +/- 1% ) Three phase ( 380 V/400 V/415 V +/- 2% )
Wave Form DistortionNill
Response Time10 m.sec
Correction MethodStepless correction using Variac
Control CircuitFully automatic IC based solid state, glass epoxy control card for easy on line serviceability
Input Frequency45-55 Hz
CoolingNatural air /oil
EfficiencyBetter than 98%
Duty Cycle100 %
OperationAuto / Manual
No Load LossLess than 1%
SuitabilitySuitable for 3 phase unbalanced/balanced supply, unbalanced/balanced load
Operating Temperature-15 °c TO 50 °c
Additional FacilityStep down / isolations
Compatibility toSpecially designed control card for faithful
DG SetOperation on mains as well as DG set
Control PanelPower on indicator, low /high input indicator, auto/manual selector switch, push switches to adjust output voltage in manual mode, selector switch to monitor input/output voltage with in 5 % of the set output voltage, volt meter to indicator output/input voltage
Transformers & VariacAre wound with electrolyte Grade Copper of 99.9 % purity Low loss CRGO lamination is used to Increased over all efficiency This reduces energy losses and hence saves electricity
EarthingProvided through two bolts 7 nuts
High VoltageWith stands 2.5 KV for power transformer
InsulatorBetter than 5 m ohms because of wound
ResistanceComponents being baked in the oven at 110 °c after vacuum impregnation

Step Down Transformer

Step Down Transformer:



Key Features :

  • High efficiency, high reliability and accuracy. Compact, rugged in construction, free standing, floor mounting model and housed in sturdy metal casing with sufficient ventilations.
  • High insulation values.
  • Suitable for use with modern sophisticated micro processor based equipment, CNC machines, computers and other Industrial processing.
  • Supply and outgoing terminals brought out with proper brass bolts/terminals under sheet secured cover with proper marking.
  • Isolates the equipment from noisy power line.
  • Reduces Power line noise, surges, spikes & transient.
  • Provides the complete electromagnetic & electro static shielding.
Looking for Servo Voltage Stabilizer ?
© Servo Technologies System
 
Desktop Site Back to top